The other is 1965mm high with the handle at 1015mm from door and floor.
Interior door handle height.
Personally i think it looks weird.
The bottom surface of doors and gates on the push side must be smooth to a height of at least 10.
Most doors for home installation are 80 inches tall and door handles are generally placed on the door three feet from the floor.
All handles pulls latches locks and other operable parts of the door should measure between 34 inches and 48 inches above the floor.
As it turned out there is no certain standard for height at which the handles should be attached to interior doors.
The international building code has established doorknob height between 34 and 48 inches above a finished floor.
Door hardware ada compliant locks exit devices handles pulls latches and other operable parts on doors shall comply operable parts of such hardware shall be 34 inches minimum and 48 inches maximum above the finish floor or ground.
This facilitates access since mobility aids including wheelchair footrests are sometimes used to push or prop open doors.
A few exceptions are included in the bill.
The height of the door handle must be between a minimum of 34 and a maximum of 48.
The australian standard as 1428 1 design for access and mobility part 1.
Simply they must be installed in such a way that at the time of opening or closing the interior door there would be no inconvenience.
Exceptions to the rule include doors that provide egress into swimming pools or other water features.
Fortunately the standards for ada door handle height are not much different than traditional recommendations.
Installers typically drill the hole centered 36 inches above the floor if not specifically instructed to do so differently.
Both handles are 80mm above the top of the cross rail and they both feel too high when i use them.
